The Analyses of Approaches related to Safety Enhancement of Dangerous Goods Transportation in a Science Perspective

Authors

  • Hexuan Zhang

DOI:

https://doi.org/10.61173/9htncm31

Keywords:

Dangerous Goods, Dangerous Goods’ Transportation, Safety Enhancement, Material Science, Thermal Treatment

Abstract

Nowadays, the demand for dangerous goods and their transportation is increasing daily. Consequently, the accidents that are caused by it are also becoming more and more common, since those accidents related to dangerous goods’ transportation are usually extremely harmful and have many adverse consequences, enhancing its safety is now therefore becoming very critical. Subsequently, in this paper, three possible approaches that are possible to enhance the transportation safety of three certain kinds of dangerous goods, which are corrosive goods, explosive and flammable goods, and radioactive goods, have been brought and analyzed. A brief introduction to each approach is provided, and each of those introductions will be followed by an alanylation including but not limited to the pros and cons of those approaches, the feasibility of them, and also the further optimizing methods for them. By conducting those eventually optimized approaches, combined with other approaches, perhaps a non-scientific perspective approach, plenty of those dangerous-goods’-transportations-related accidents can be prevented, and the safety of it and the safety issues related to it can also be enhanced to a great extent.

References

[1] Janno J, Koppel O. Human factor as the main operational risk in the dangerous goods transportation chain. Business Logistics in Modern Management, 2017.

[2] Janno J, Koppel O. Operational risks in dangerous goods transportation chain on roads. Log Forum, 2018, 14(1).

[3] Forigua J, Lyons L. Safety analysis of transportation chain for dangerous goods: A case study in Colombia[J]. Transportation Research Procedia, 2016, 12: 842-850.

[4] Handoko W, Pahlevani F, Sahajwalla V. Enhancing corrosion resistance and hardness properties of carbon steel through modification of microstructure. Materials, 2018, 11(12): 2404.

[5] Cao Y, Ahlström J, Karlsson B. The influence of temperatures and strain rates on the mechanical behavior of dual phase steel in different conditions. Journal of Materials Research and Technology, 2015, 4(1): 68-74.

[6] Weltschev M, Baessler R. Use of alloy 59 for the transport of highly corrosive dangerous goods[J]. Advanced materials research, 2011, 278: 581-586.

[7] Baalisampang T, Abbassi R, Garaniya V, et al. Review and analysis of fire and explosion accidents in maritime transportation. Ocean Engineering, 2018, 158: 350-366.

[8] Chmieliński M. Requirements regarding safety maritime transport of explosives materials. TransNav: International Journal on Marine Navigation and Safety of Sea Transportation, 2020, 14(1).

[9] Anderson K, Jackson G, Fialkoff M, et al. Regulatory Development Challenges and Opportunities for the Safe and Secure Transport of Radioactive Materials. 2020.

[10] More C V, Alsayed Z, Badawi M S, et al. Polymeric composite materials for radiation shielding: a review[J]. Environmental chemistry letters, 2021, 19: 2057-2090.

Downloads

Published

2024-12-31