Analysis and Validation of Sponge City Construction in Mountainous Cities based on SWMM - Taking Nanan District of Chongqing as an Example

Abstract

Sponge city construction is one of the key topics in today’s research. China’s sponge city construction has gradually entered the stage of optimization and effect evaluation. However, there are still some gaps in issues such as the verification of the effect of sponge cities. Therefore, in this paper, Storm Water Management Model (SWMM) is carried out by collecting data on surface runoff, waterlogging, peak flow, control rate, etc. in Nanan District of Chongqing City. At the same time, reasonable Low Impact Developments (LID) facilities such as rain gardens, permeable paving, bioretention tanks, rain barrels, rooftop rainwater harvesting and rooftop gardens are incorporated into the sponge city design and verified by using a typical rainfall process with a return period of 5a and a duration of 3 hours. The results of the study showed that the surface runoff drainage time in one catchment was 11.1% faster before and after the LID facilities were installed in contrast, the peak flow reduction rate of the main pipe was 71.55%, and the average runoff control rate in each catchment was around 40.57%. In conclusion, the LID facilities are not effective enough to reduce the rainfall runoff above the medium rainfall, while they are more effective below the medium rainfall.